Epson printer is a multi-purpose printing device. Epson – expression home XP-440 wireless all-in-one printer becomes one of the best printers due to its enhanced technology. If you are owning Epson – expression home XP-440 wireless all-in-one printer, then you must need to know the setup procedure before using the printer. If you are searching for the setup procedure of Epson expression home XP-440 wireless all-in-one printer, then this guide is for you. Here, in this article, we are going to discuss the steps that can help you learn the procedure of Epson – expression home XP-440 wireless all-in-one printer setup. Go through the undermentioned part of the article to know the details on it.
Steps to Set up Epson – Expression Home XP-440 Wireless All-In-One Printer
Here, in this part of the article, we are going to discuss the steps that can help you to set up Epson expression home XP-440 wireless all-in-one printer. So, read the entire article and learn the quickest way to set up your Epson printer.
Step 1: Step to Unbox the Epson printer
To set up a printer, at first, you will need to unbox the printer. Here are the steps that can help you to do it. So, let’s go ahead and open it up, then see what is inside. Then, you can go through the setup procedure of this printer. So once you have the printer box in your hand, cut it to open it and let us start to take out its parts.
Step 2: Install the Print Cartridges
After unboxing the printer, put out the printer from its box. Now, let’s figure out how to install the print cartridges.
- You will find out a power cord in the back of the printer. This power cord will help you to power it on.
- Plug in the cord with the power sockets and turn on your printer.
- After that, you have to go through the language set up procedure. Set your language as per your preference.
- Thereafter, it will ask you to install the ink cartridges. Then, open the entire back.
- After that, you will be able to see the ink cartridge in there.
- Then, tear the ink cartridge. Now, you will need to pull that off and slide it and put the ink cartridge inside of it.
- Now, close up the printer. Then, it will ask you to check the ink cartridges.
- Once you have successfully done with the initialization procedure, then let’s move on to the next step to know the Wi-Fi set up procedure.
Step 3: Wi-Fi Setup procedure
Once you have completed the previously discussed steps. Now, this is the time to learn about the steps to Wi-Fi set up procedure.
- At first, click on the Wi-Fi option.
- Thereafter, it will ask you for the password. Then, place your provided password.
- After that, it will ask you for permission to print a check report.
- Now, you should put a paper on the provided area of the printer.
- Then, you will be able to run the printer and confirm it.
Step 4: Software Installation
While completing the steps to Wi-Fi set up procedure, now you have to go through the software installation procedure. Here are the steps that can help you to do it.
- First, you will need to visit the official website of Epson printer. From there, download the printer installation files.
- After that, allow your printer to install the printer driver.
- Then, you will be notified with a screen while asking the terms and condition. Accept all the terms and conditions.
- Now, wait a few minutes to complete the installation procedure.
- Thereafter, you will find a stepwise instruction. At first, click on the wireless connection.
- Next, click on the setup options. But, check whether have you connected with the provided network or not.
- Then, you need to check if it is printing properly or not.
Summing it Up
The purpose of writing this article was to let you know about the steps of Epson – expression home XP-440 wireless all-in-one printer setup. If you have any question regarding this topic, then comment us down in the comment section. To get more information about the Epson printer, visit our official website.