Category Archives: Uncategorized

01Mar/19

Epson Error 0x97: A Comprehensive Guide [Step-by-Step]

Similar to other printers, or for that matter any device, the Epson printer also manifests certain errors and problems. The Epson error 0x97 is one of the annoying complications amidst many.

A solution for this error is necessary but so are learning about other fundamentals related to the Epson printer errors. Read and study the entire article to know every nook and cranny related to the error 0x97.

What is the Epson Error 0x97?

The Epson 0x97 error is essentially a warning which indicates some issue with the internal hardware. Mostly it arises due to the failure on the part of the motherboard or other interior components. And, when the problem arises, canon printer error u075 it takes place all of a sudden which may result in your printer to halt the basic printing process. Thereby, all the standard functions of the printer come to a sudden pause, hampering a seamless workflow. In most cases, the hardware may require a quick replacement. But, if the problem isn’t that grave, you can troubleshoot it by following the underlying effective solutions.

How to Fix Epson 0x97 Error Effectively

Now that you are well aware of the essential fundamentals related to the error, proceed to the solution portion for an effective troubleshooting process. Underneath are the brilliant methods by which you can have the error resolved in no time. So, without much ado, let us begin with the procedures to fix it all!

Method 1: Unplug the Printer and then Plug it Again

The process says it all! Yes, you must begin with such inspections and connection checks, because you do not want to get stuck after completing certain critical steps and get no result. Check the primary connection to avoid skipping any possible man-made errors and mistakes. Obey the successive steps mentioned below in order to resolve the Epson error 0x97 entirely.

  • First, open the lid of the printer and check for the presence of any paper jams or any trash or paper debris. If yes, remove them gently without impacting the interior of the printer.
  • Then, unload the cartridges from the Epson printer after which you must unplug the USBs along with all the cables of the printer. brother laser printer says paper jam.
  • Next, you are required to interact with the Power button which releases the residual current from the printer.
  • After that, plug the USB back along with other cables to the Epson printer. Then, switch On the device and inspect whether the error resurfaces.

Method 2: Unplug and Plug your Devices in an Inverse Manner

Now, this is just an inverted model of the method discussed earlier. In case the previous procedure fails to remove the Epson error 0x97, you must attempt this method successively. Walk through the following steps.

  • Power Off your printer and then unplug all the cords connected to it.
  • Secondly, be patient and wait for 4-5 minutes after which you must hold down the Power key for a minimum of 60 seconds. Don’t release it prior to the mentioned time limit.
  • Then plug in the power cord during the time of holding down the Power button once again. Then, continue to hold it down for another 60 seconds after the insertion of the cable.
  • After the plugging of the power cord, release the power key and inspect if the error code is still exhibiting on the Epson printer or not. Thus, you can conveniently resolve the 0x97 error.

Method 3: Cleanse all the Clogged and Blocked Epson Printer Nozzles

Another reason for the error to manifest is the wasted ink spilled around the head sprayer. For resolving this issue, you must stick to perform the following steps and resolve the Epson error code 0x97.We present the steps of cleansing the printer nozzles carefully. Be thorough in your understanding of the steps.

  • First, turn Off your Epson printer and then separate the connection from the power supply and the computer.
  • Then, open the lid or the casing of the Epson printer, after which, you must bring a piece of cloth and wet it by dipping it in an ammonia-based fluid meant for cleansing.
  • After that, fold it in a manner that it sits perfectly under the printer head and then let it work up for twelve hours at least.
  • Then, separate the towel and shut the printer lid, after the twelve-hour session, that is.

Inspect the printer’s functionality with the help of a trial session. Print any written piece or document in order to check. But, if you still receive the error, proceed to the next step.

Method 4: Troubleshoot and Install the Drivers that are Missing

This is the last resort in case you have encountered a failure with the earlier mentioned steps. Obey the underlying steps to fix the recurring error.

  • Download and install the Windows Printer troubleshooter and run the program to determine the error with the assistance of the program
  • Then, install the printer drivers that were removed and then click on the Windows menu. After that, choose the option that says Device Manager.
  • A fresh window appears on the screen to which you must opt for the Printers option. Then, locate the printer which bears the particular issue. Right-click on it after which you must choose the option that states Update Drivers.
  • Finally, authenticate if the Epson error 0x97 is still present. Print a document to verify it.

Most probably, this final procedure is sure to troubleshoot the issue entirely.

Need Assistance? Connect with our Professionals for Affordable Services

Now, you can resume all your standard functions of the printer i.e., replicating several documents or converting soft copies to hard copies. With these effective steps, you can easily resolve the 0x97 error and maintain the previous seamless workflow. However, if the Epson error surfaces once again or stays even after all the troubleshooting methods, proceed to connect with the skillful professionals adept at tackling plenty of severe challenges with the printers as well as minor technical glitches. Contact our operators at +1-800-311-6890 who are proficient in guiding customers comprehensively. And our professional guidance walks you through the solutions effectively. Also, you can email us at our official email address.

For instant solutions, you can also refer to our Live Chat options. We render 100% satisfaction to our customers with our efficient delivery of services which are highly affordable along with providing promising service quality. Our years of expertise has declared our proficiency in our task.

18May/18
Fix Computer Freezes Issues When Trying to Print in Epson Printer

How to Fix Computer Freezes Issues When Trying to Print in Epson Printer?

Sometimes printer issues appear from nowhere. You pass a printing command and suddenly you come across a printing error. On such circumstances, Epson Printer Support Number proffers the best help that you can have. With years of experience, they will help you Fix Computer Freezes Issues When Trying to Print in Epson Printer.

When you try to print through Office or Adobe Reader or even through Word pad doc, your printer does not whirl into action. The command goes into ‘not responding mode’. There are many possibilities due to which the error may appear. The outdated driver, improper connection, compatibility issues and so on are prime reasons for this error.

Efficacious Solutions to Troubleshoot Computer Freezes Issues When Trying to Print in Epson Printer:

Before starting the troubleshooting process, first, create a restoration point. If anything goes wrong, you will at least have the backup of your system. Perform the steps as directed to avoid mistakes. Else you can also connect with Epson printer repair services to get smooth and hassle-free troubleshooting services.

Solution 1: Check the Printer Spooler Service is on or not

  • First of all, you need to right-click on Computer followed by clicking on Manage.
  • Pull down the Services menu and applications when the console opens.
  • Now double click on Print Spooling Key after clicking on Services.
  • Navigate to Startup Type in General option and thus set the value to Automatic.
  • Now click on Start to start the Spooler Service.
  • Restart your system after clicking on Apply. Look for the computer freezes when printing windows 10 error on the display screen.

Solution 2: Alternate Solution

  • Navigate to Control Panel after clicking on the Start button.
  • Choose Programs and Features followed by clicking on “Turn windows features on or off”
  • Enable the options LPD and LPR after expanding “Print and Document services”.
  • Disable Internet Printing Client and thus restart the computer.
  • Re-install the drivers and check whether the printing is possible or not.

Grab Our Epson printer Support Phone Number 1-844-523-5136  for Complete Efficient Help:

If you have followed all the steps as per instruction and the issue still appears, call our experts at Epson Printer Support Number and get a hand to hand information to get the issue resolved. Other than that, they will also guide you which solution will be better depending on your printer model and problem. Call now, avail this opportunity.

15Nov/17
Troubleshoot Epson Printer Error 9923

How to Configure EPSON Receipt Printer to Print Online Orders?

Epson is the most popular brand name and now it has been esteemed when it comes to receipt printers. EPSON Receipt Printer to Print Online Orders is a fully featured thermal printer which delivers fast receipt printing speed and is backed by the industry’s best-in-class reliability in high volume environments. They are easy very easy to set up, the hardware and printouts are good quality. It doesn’t take time to maintain and they last a long time.

Therefore, if you desire to be able to print Open Dining order notifications to your Epson receipt printer, though, you require utilizing Epson’s software, as the Windows automatic discovery and installation of your printer just won’t cut it. You need to download and install the Epson Advanced Printer Driver (APD), the steps are defined as below. Then just walk through the steps which given in this article in order to configure my Epson receipt printer to print online orders.

Steps to Configure EPSON Receipt Printer to Print Online Orders

  • First of all, check that the Epson printer is connected directly to your computer or over a local network, and is powered on.
  • Next, you will need to verify that the printer isn’t already installed on the Windows computer. To verify this thing, you will need to visit your Windows Control Panel in order to verify if the printer is listed on the “Devices and Printers” page. If it’s not, then its fine, but in case, if its then you must delete it.
  • Make sure that deleting an existing printer could affect a current print configuration with your restaurant’s POS system, for example.
  • Now you should properly follow the next steps to installing the Epson APD.

Installing the Epson APD:-

  • The first step for you is to download and install the Epson APD, you can do this thing by visiting the official website or visiting the internet.
  • Download “.zip format”, you will need to extract the files before you can effectively run them.
  • After extracting the files, double-click on the file named “APD_455dE.exe” to begin installation of the APD.
  • When the POP up appears, then click the Yes button to continue.
  • Then you will enter a “Welcome” window.
  • Hit the “Next” button.
  • In the “License Agreement” window, click the option to accept the terms, and then click “Next” button.
  • Next, you will be prompted to choose a setup type. Choose “Minimum (Recommended)” radio button option, which is selected by default, and click the “Next” button.
  • Then a “Printer Configuration window”, you will need to hit the “Add” button on the right side of the window, which will take you to the Add Printer window:
  • Hit on the “Select driver” dropdown and scroll to choose the “Epson TM-T88IV Receipt” item in the list and click on it. Same select “Printer name” dropdown to whatever name you want.
  • Select one proper “Port Type”, fro, options, Parallel port: Serial port, Ethernet port, or USB port.
  • In the “Set as Default Printer” drop-down the list, you only need to select option Epson receipt printer to be the main unit for ALL print jobs at your location.
  • Hit the “Next” button.
  • In the “Parallel Port Setting” page, you will need to Setting up a parallel port-LPT Port Section- you will need to hit on the drop-down list to choose the port, either it could be LPT1, LPT2, LPT3, and so forth. You may need to select each one and save the configuration change
  • After you have verified/selected your LPT port, then hit the “Next” button.
  • The above step will bring you back to the “Printer Configuration” window, which will now list your newly installed printer.
  • Click the “Next” button, which will bring up a “Start Copying Files” window.
  • Hit the “Next” button, which will begin the driver installation process.
  • Hit the “Finish” button
  • If your Epson printer is of the serial port variety, you will need to create a Serial port, and click “Next”. After then you will be presented with the Serial Port Settings window.
  • Select all the drop down one by one in the list and save the configuration change information until you find the one that successfully prints out a test page and once you have the proper configuration and then click “Next” button.
  • Now you will then go through the remaining setup windows, as above in the “Create a Parallel port” section. Follow the process like select “Printer Configuration” window then click “Next”, choose “Start Copying Files” window then click “Next”, choose “Setup Status” window and then wait for it. Then the final window, appear then click “Finish”, then you’re all done.
  • Then, create an Ethernet port, in the “Ethernet Settings window” setting, you’ll need to know the IP address of the Epson printer if you want to connect to. IP addresses for local network devices usually start with “192” or “10”.
  • Once you have the IP address entered, click “Next”. Follow the remaining setup windows in the Create port” sections, as above.
  • Create an Ethernet port.
  • When all thing completed, then you will be ready to rock ‘n roll.

Epson Technical Support Number +1-800-311-6890

If you face any issue to following the above steps, then call at Epson Technical Support Number, which is available 24×7 days to your help. We are reliable and versatile support service provider and giving excellent Epson support & services to the customers for their Epson difficulties. A team of our well-experienced and certified technicians can fix your all kinds of Epson issues.

20May/17
Steps to Password Protect an Epson Printer

Steps to Password Protect an Epson Printer? +1-800-311-6890

Protection is an essential task for every device and it’s the same case with Epson printers to password protect it. This article will guide you about top steps to password protect an Epson printer by Epson Printer Support Number 1-844-523-5136 experts.

Steps to password protect an Epson printer

Setting up of a password

Installation of a commercial program will let users protect the printer with a password, so that no other print jobs will be able to complete without providing the right credentials. Printlock here will works with any kind of printer which is connected to a Windows PC by prompting for a password whenever a document is being sent to the printer.

  • Go to the browser and then download the software from the Print lock URL.
  • Installation of the software on the device which is connected to the printer a user is wishing to protect is necessary.
  • When prompted, input a password which will only be remembered by users.
  • The next time if a user is trying to print, they will immediately prompted by a password dialog box. The print job will not complete until the correct password is entered as suggested by Epson Printer Technical Support

Restricting user’s account

Windows does not comes with a built-in password feature, but if a user account has a password set to it, one can set it easily so that only their account can be accessed to the printer by locking out all other users who can’t access their username and password.

  • Log in as an administrator users and click on the Start, Printers & Faxes option
  • Find the printer which you want to protect, and right-click the Properties option. In Windows 7, users need to double-click on the printer icon and then select the Customize this printer option.
  • Hit the Security tab, and a security setting for the printer will be visble.
  • Highlight the type of account in the Group or User Names section, and make sure that all the boxes under Allow icon are properly checked.
  • Highlight the “Everyone in the Group or User Names” section, and make sure that all the boxes under the Deny are fully checked.

What users can expect at our Epson support section:

  • Error Troubleshooting with Printers
  • Online Assistance for Spooler Problem
  • Printer Tune-up and optimization
  • Paper Jam and Slow printing problem
  • Driver Repair and Re-installation Support
  • System Compatibility Issues with Printer
  • Printer Network and Connection Problems
  • Printer Setup and Configuration Issues
  • Driver Installation Support Service

Epson Customer Support specialist engaged in delivering the fastest ever printer support services in a well-known printer support organization. He had been chosen as the best article writer in the field of Epson topics. He holds deep technical expertise in resolving a wide number of printer issues as and when required by users.

 

02May/17

How to enable Wi-Fi Direct mode in Epson printer? +1-800-311-6890

Wi-Fi Direct Mode Setup in Epson printer easily fix up the product to communicate directly with the computer or another device without even requiring a wireless router or any kind of access point. As said by Epson printer Setup support technicians, while operating in this mode, the user’s product will easily display an AP connection symbol on the LCD screen in a clear view. This is an advanced process where one can easily choose to establish a direct communication between both the devices: the printer and the computer or with other devices, without the use of a wireless router or an access point. But as this is a technical term, enabling Wi-Fi in direct mode issues can occur anytime. So a proper care needs to be taken care of.

Step to enable Wi-Fi direct mode in Epson printer

Step1: Home button

Tap on the Home button carefully and then press the ‘Wireless’ icon to proceed further.

Step2: Wi-Fi set up

Selection of “Wi-Fi” Setup is to be made and wait until you are directed to the next step,

Then, from the list of options available in front of you, just choose the Wi-Fi Direct Setup icon.

Step3:  Connection set-up

  • Tap on the Connection Setup wizard button and then carefully choose the ‘Change Password’ option. Click on the Yes button to continue.
  • Enter the Wi-Fi Direct’s password which should at-least be of 8 characters and then tap on the “Enter” button.

Step4:  Scrolling button

  • Keep on scrolling down to easily view the SSID feature (Wi-Fi network name) and password.
  • With the help of your computer device or any other wireless device, selection of the SSID on the Wi-Fi network name is suggested by Epson printer technical support team members and next, just enter the password as guided by expert team.
  • Click on the “Home” button to get directed to the Home screen easily.

Here all your headaches related to Epson printer have been resolved. Our expert teams of Epson printer configure support professionals are all time ready to fix your problem at go. Call us Toll-Free 1-844-523-5136 for your Epson problems and we are right there at your doorstep

19Apr/17

How to Troubleshoot Epson WF- 4630 Wireless Printer Not Printing issues

When you are working with Epson WF- 4630 Wireless Printer sudden arrival of issues can hold your work for some time. Concern points include for Epson WF- 4630 Wireless Printer Not Printing issues, paper jam, printing quality subject which can affect the printer productivity thereafter. Checking the device thoroughly on your end and you fail to come across the actual problem. The issues can also come with other connected devices to printer. Therefore by following the below mentioned guidelines you can get your problem resolved or get in touch with Epson Printer Support and regain the working of Epson WF- 4630 Wireless Printer Not Printing issues.

Steps to Fix Epson WF- 4630 Wireless Printer Not Printing issue?

Method 1: Go through the following steps and get fixed your Epson WF-4630 Wireless Printer Not printing issues with easy phase

  • Power off the devices connected with printer in the following order, Epson WF-   4630 wireless Printer, computer system, router, wireless access point.
  • After turning off, Power on the devices in the following manner: router and access point, PC, Epson Printer WF-4630.
  • Ensure the device is fully activated before going to the next one. This will hopefully allow the device to reinitialize and establish connection.
  • After following the above steps recheck the printer if working is regained start taking the prints else follow the second METHOD for fixing the issue.

Method 2: In case you are facing the printer issues, uninstall the printer software and reinstall afterwards. The following steps should be performed after all devices connected to printer have been restarted.

  • Uninstall the troubled Epson Software from your computer system.
  • Once removed re-install the software having wireless printer features.
  • Go through the Wi-Fi connection setup simultaneously having the proper look over the setup process.
  • Wireless credentials are needed to enter the wireless so as to connect with the wireless network.
  • Setup process is compatible then the printer is available for printing.
  • Run for the test print.

The above two methods are sufficient to fix the Wi-Fi connection issue of the Epson WF-4630 and allow you to print immediately. There may be chances that the complicated issues are still on depending on the wireless network and its configuration. You may contact Epson Printer Customer Support USA @ +1-800-311-6890 (toll-free) and they will assist you in resolving each and every problem which is failing to accept the print command.

18Apr/17
How To Reset The Epson K100 Adjustment Program

How To Reset The Epson K100 Adjustment Program?

The Epson K100 Adjustment Program is especially used to reset all the “Waste Ink Pad Counter” feature, and “EEPROM initial settings”. Epson K100 is a software which is developed to enable the printer print continuously without error. But as we know, technical issues may happen anytime while working the printers and so our Epson printer technical support professionals have described various advanced steps to reset the Epson K100 Adjustment program effectively.

Other functions of Epson K100 Adjustment Program are:

  • Handling of the”Initial Ink Charge” features
  • “Head ID Setting” management process
  • Adjusting the “top margin Adjustment” mode,
  • Helps in managing the “Bi-D Adjustment” feature
  • Managing of the “USB ID Input” process.
  • The Epson K100 Adjustment Program also helps in the cleaning process of the “Print Head” as well.

Steps to reset the Epson printer K100 Adjustment Program

Step1: Connecting the printer

  • Connecting the printer to the computer initially to turn it on is the very first step to be performed by users.

Step2: Extraction phase

  • Extracting of the “Adjustment program” for Epson K100 is needed as advised by Epson printer K100 Adjustment Program tech support

Step3: Adjprog file

  • Open it and then get access to the folder which is named as “Adjprog file”.
  • Next, simply click on the “Select” option

Step4: Clicking on the arrow

  • Click on the arrow and then select the “K100” option to proceed further

Step5: OK option

  • Next, just tap on the “OK” option

Step6: Particular adjustment mode

  • Next, you are simply required to tap on the “Particular adjustment mode” option

Step7: Waste ink pad counter

  • Selection of the “Waste ink pad counter” is necessary for users
  • Next, simply click on the “OK” option and tap on the “Check” icon

Step8: “Check” option

  • Tap on the “Check” option and then carefully tick the “Main pad counter” icon

Step9:  “Initialization” icon

  • At last, simply click on the “Initialization” icon and tap on the “finish” option to finish the process

A note of caution:

Adjustment program for Epson K100 software can be well utilized for other K series printer such as K101, K200, K201, K300, K301 and many more.

Come and explore our Epson printer customer support  Toll-free  +1-800-311-6890 to help us assist you in resolving all your related Epson printer technical snags. We promise our customers to deliver them an utmost level satisfactory results as and when required

06Apr/17
Epson printers

How to Fix Common Epson Printer Error Codes?

Epson printer Errors happen while printers hazardously winds up defiled. According to as concentrate by our Epson Printer Repair Service professionals, such blunders can prompt slower reaction of the printer and therefore, time will be devoured. It is frequently found on account of different applications running on the printer, clients may encounter enormous crashes and stops. In this way, our master group has scribbled down couple of answers for such mistakes

Common Epson Printer Error Codes

Error W-05: This indicates that a user is out of paper or even it is possible that multiple pages have been fed wrongly. Using the page feeder, reload or load multiple paper before pressing the ‘start’ button.

Error W-02: The paper used in the Epson printer machine has either become jammed and you really need to be careful enough while removing the jam.

Error W-03: This is a kind of paper which is used in the machine has become entirely jammed and one definitely needs to be carefully while resolving the jam issue.

Error W-04:  The cover of your printer cartridge has opened and user should be able to close it before they press the “START” button and resume from the printing process.

Error W-10: In this case, the ink cartridges in the Epson printer have become completely empty or are incorrectly installed by the user. Here, the cartridge should be replaced carefully. But if this code still persists in your Epson printer after a replacement has been made then it means that the cartridge was not installed accurately. By simply pressing the “start” menu button, you are supposed to move the cartridges to a correct position where they can be replaced properly. To continue further, simply press down on the installed cartridges and then press the ‘start’ button.

Error W-11: The ink cartridges in the Epson printer have become entirely empty or even it may be possible that it is incorrectly installed. In such case, the cartridge should definitely be replaced by users carefully. If the code still exists then it means that the cartridge was installed in a wrong manner. Press the ‘start’ menu and then move the cartridges to the position where they can be easily replaced. To continue, press down on the installed cartridges later on and press ‘start’.

Call us our Epson Printer Customer Support +1-800-311-6890 professionals immediately if your issues are not yet resolved yet. We are ever ready to help you out in every difficult situation which arises at your end.

03Apr/17
Troubleshoot paper feeding issues on an Epson L355

How To Fix Epson Printer L355 paper feeding issues?

The Epson L355 is a one of the renowned wireless all-in-one printer which comes with integrated ink system and is quite ideal for home users, office purposes and other small offices. This printer model comes with scanning and copying features and has full Wi-Fi connectivity. It consists of two extra bottles of black ink included in it. As per as research is concerned by Epson wireless printer support professionals, this type of issue occurs due to the use of poor, too thick or old paper being placed into the printer. It further restricts the process of paper feeding roll to grab the paper sheet.

Steps to troubleshoot paper feeding issues on an Epson L355

Step1: Safety first

First immediately shut down the printer to avoid any kind of Epson printer paper feeding problems.

Step2: Initial setup

Pull down various parts of the printer that hold the paper in an appropriate place. It’s one of the best ways to locate the roller and much more comfortable

Step3: Recon

  • Position the printer behind the black plastic part. If it’s not been positioned well, it may get stuck.
  • Use your index finger to press it in upward position or simply make use of the back area of a brush gently. hp tech support This is quite an easy process to have.

Step4: Cleaning process

  • If the roller is not clean enough then it won’t catch the paper and will simply throw out an error onscreen.
  • This will happen while using old, wrinkled, thicker or even non printing paper features.
  • Make use of a cloth with few drops of water to easily rub the rubber section.
  • Be careful enough to wipe all the dust. Let it dry for few more minutes.

Few precautions

Avoid working with abrasive oils or even cleaning the liquids because they may easily damage the rubber which catches and easily hold the paper sheets.

If you have any kind of issues on an Epson printer L355 related to printer, then we request you to get in touch with us at our Epson printer customer support section for immediate assistance anytime anywhere. We are a team of fastest printer tech support solution provider for every issues related to all printers such as Software installation issues, router repair service Driver Upgrade, Change Printer ink, Printer Spooler and Paper Jam issues etc. If users are unable to solve this problem, they are welcome to drop us an e-mail and we promise to get back to them in short time span via our professional printer contact details. So, come and join us for tom experience our exceptional level printer solutions to your unexpected and critical issues.

30Mar/17

How to troubleshoot EPSON-ET-2550 printer for setup & register

Epson ET 2550 Printer is defined as an integrated inkjet printer which comes to be useful for day-to-day printing purposes. Users can easily setup the Epson printer in just few minutes. This printer is designed in a way to ease every user work by achieving maximum efficiency level. According to Epson printer Setup team, the Epson supports presentation paper matte, Double-sided presentation paper matte, Glossy paper, A4, B5, A5, A6, paper sizes as well as envelopes.

The Epson ET-2550 Printer, epson l355 wifi setup is a must to have for every user as it offers tremendous capacity to handle up to 100 pages in a short time span. The printer can print, scan and copy for multiple options to by providing you multifunctional printing ability.

Top EPSON-ET-2550 printer features jotted by teams

Step1: Extreme performance and sleek design

The printer comes with a sleek and fast performance attribute

Step2: Wireless and Cloud printing:

Users can cherish its wireless and cloud printing features
Step3: High resolution scanning and printing

Come and work with the high resolution scanning as well as Epsons’ printing features
Step4: Remarkable images and crisp text

Enjoy its eye striking as well as remarkable images
Step 5: Ultra fast and user-friendly

Experience its super fast and user friendly working attributes that make this printer the topmost brand than others

Steps to setup and register EPSON-ET-2550 printer in Epson connect

Step1: Turning the power on

Turn on the Epson Printer initially.
Step 2: Installation

Installing of the Epson connect printer setup directly from the Printer driver installation disk section is an essential step for users and then launch the application carefully. According to Epson professionals, the application will automatically search for the printer and will then display it.

Step3: Selection mode

You are required to select the type of printer and then click on the” Continue/Next” button to proceed with the method.
Step 4: Registration

After you are done with the selection process of your printer, then tap on the “Printer Registration” process
Step 5: Agreement

First click on the “Continue/Next” icon to continue with the License Agreement page by ticking on the check box.
Step6: Agree button

Click on the “Agree” to agree the License Agreement page and click Next to take the print out of it.
Stage of completion: Go for the details in the page and then click on the “Finish” button to register your Epson Printer to Epson connect

For getting more insights about connecting epson printer to wifi network our Epson brand or any related error, please get in touch with our Epson printer customer support professionals. We are happy to help you in resolving all your critical Epson issues