Category Archives: Epson Printer Support

What are the Most Common Epson Printer Error Codes and How to Fix them?

Printers have given us freedom from manual efforts for making copies, but sometimes they can annoy to a great extent when they encounter issues like error codes. All you get to see is a small message indicating number along with a one-line text which only an expert can understand who has relevant experience in handling Epson printer error codes issues. There is no doubt that Epson is one of the most established brands in the printing industry, but any gadget can collapse with time. Here mostly due to lack of knowledge, users directly start searching for an Epson printer repair service provider by typing “Epson printer repair near me” in their browser without even knowing that they can fix these error codes on their own.

You only need some basic technical knowledge and patience to resolve Epson printer errors. Below I have mentioned some remedies along with the description of error codes in all the series of Epson printers.  Here you need to make sure that the solutions are applied in the same manner in which they are written as any deviation from a procedure can affect the result.

Epson AcuLaser Series

A) Code: 6030

Description:

pressure roller high-temperature error

Causes:

When the temperature of a heat roller does not reach a specified value for 22 to 40 seconds after the warm-up is started, then this error arises. Sometimes.

Remedy:

Method 1:

  • Check the connection between a fusing unit and connector
  • Now remove the fusing unit and install it again

Method 2:

Analyze if the heater lamp 1 (H1), 2 (H2) light is on when you turn on the printer. If it is off, then you have to replace the fusing unit.

B) Code:  6034

Description:

Multiple manual feeder pusher errors

Causes:

While loading papers a printer detects the MPT push-up tray position. If the output of the manual tray upper position sensor (PC15) does not change even when the stipulated amount of time has passed, then it indicates that the MPT push-up plate is abnormal.

Remedy:

  • If the manual tray does not push paper to the paper load roller, then arrange the papers on the manual tray.
  • 2 If the manual tray paper load roller one-way clutch does not have the claws, then replace the one-way clutch gear. If it has the claws, then replace the manual tray paper load solenoid.

C) Code:  0060

Description:

It is a fusing motor malfunction error which shows up in the printer like this:

“Fusing motor (M4) Print control board (PRCB)”

Causes:

It happens when the fusing motor does not rotate evenly even when the given period has lapsed. In such condition, the motor lock signal remains HIGH for a period of consecutive time while the fusing motor rotates.

Remedy:

  • Check the M4 connector for eliminating connection errors
  • Analyze the fuser unit driving mechanism and look for possible overload  3 Check the PRCB connector for proper connection

Epson printer error codes

Epson Artisan Series

A) Code:  05

Description:

It is a paper jam error in which you will find some papers stuck in the scanner unit.

Causes:

It happens when the paper remains in the path even when it is ejected.

Remedy:

Here you need to replace the waste ink tray assy and lower paper guide waste ink pad assy. After doing this, you need to reset the waste ink counter.

B) Code:  09

Description:

This error indicates no ink cartridge in the printer. It will tell you to install the mentioned cartridge.

Causes:

This error occurs when the I/C of the printer is not set.

Remedy:

  • If the Memory chip on the ink cartridge is disconnected or damaged, then you have to replace it.
  • 2, Connect the CSIC FFC correctly
  • Replace the CSIC Assy if it is damaged

C) Code:  17

Description:

It is a duplex unit related error

Causes:

When the printer fails to detect the duplex unit, then users encounter this problem. Majorly a jammed paper or duplex unit sensor failure creates this issue.

Remedy:

  • Install the duplex unit correctly
  • Check if the duplex unit sensor is connected or not and if it is damaged then replace it.
  • If jammed paper is the reason, then remove the duplex unit by opening the cover, and then take out the jammed paper. Now leave the printer ON and reinstall the unit.
  • Replace the PE sensor if it is damaged

Epson ME Office Series

A) Code:  06

Description:

This error generates when the printer is low on ink and needs replacement. It is known as Ink end error.

Causes:

It appears due to low Ink in some I/C.

Remedy:

  • Install the ink cartridge correctly
  • Look for memory chip and check if it is connected accurately. Also, check if it is chipped or not.
  • Analyze if the dead FFC is connected to the connector on the CSIC Board.

B) Code:  12

Description:

It is a DSC direct error. In this, the printer fails to recognize the device

Causes:

This error arises when an unsupported device is connected to the port for establishing a connection to external memory devices. In such situation, the DSC needs more current than the mechanical limit.

Remedy:

  • Replace the USB Cable if it is damaged  
  • Check and Verify whether the digital camera is compatible with the printer. If not then install a consistent option.

C) Code:  01

Description:

It is a communication error which will display in the printer like this:

“LED Power: – LED Paper: – LED Ink: -“

Cause:

When the panel FFC is not connected to the panel board, then this error comes up. Sometimes a faulty panel board can also create this issue.

Remedy:

  • Connect the panel FFC to the panel board and main board connectors.
  • Check the panel FFC for damages and replace it if it was damaged.
  • Connect the cable of the power supply board to the main board connector CN60 if they are not attached.
  • Insert the blue colored pin of the power supply board connector cable into the 1 Pin of the Main Board connector.

Epson PictureMate Series

A) Code:  08

Description:

It is a communication error where the printer is not able to communicate with the computer.

Causes:

It can happen due to a damaged AC adapter cable, failed connection of Panel FFC to CN1 connector, damaged panel board or main board, faulty battery, etc.

Remedy:

  • Replace the AC adaptor or the cable with a new one if it is damaged
  • Connect the panel FFC to the panel board and main board connectors if they are not connected properly.
  • Replace the Panel FFC if it is malfunctioned
  • Charge the battery if it has not collapsed but if it has failed the replace it.
  • Replace the main board if it is damaged

B) Code:  09

Description:

This error is a fatal one for your printer. When this error occurs, your printer will suggest you see the documentation.

Causes:

By nature, this error generates when the damage is irrecoverable. Majorly it happens because of the damaged main board or CR motor. Sometimes a faulty connection between them can also be responsible for this.  

Remedy:

  • Check the Main Board for damage and replace it if needed
  • Check if the CR Motor cable is connected to CN2 connector on the main board or not
  • Replace the CR Motor if it is damaged.

C) Code:  05

Description:

It is a photo cartridge out the error and below is the displayed quote which will show in the printer when it encounters this issue:

“Photo cartridge not installed. Open cartridge cover, then insert a cartridge.”

Causes:

It generally happens when the cover is closed without a photo cartridge.

Remedy:

  • Correctly install the Ink Cartridge
  • Check the memory chip on the cartridge and see if it is chipping or any other damage has occurred
  • Replace the ink cartridge with a new one.
  • Check if the tension spring 1.46 is disengaged. If yes then attach the tension spring 1.46 to the tabs.

Epson Stylus Series

A) Code:  13

Description:

It is a memory card error in which the printer does not recognize the memory card or disk and asks you to format it.

Causes:

It can happen due to compatibility issues, damage card, or wrongly inserted card in a slot

Remedy:

  • Check the version of your memory card and see if it is compatible with your printer
  • Replace the card if it is damaged
  • Check if a memory card is inserted into the right slot without using the adaptor.
  • Review if the memory card slot pins on the main board are bent or broken. If yes then replace it.

B) Code:  14

Description:

This error occurs when there is no index sheet, or it is not accurately positioned. Generally, it shows itself with the name of Index sheet error 1 which is code 14.

Causes:

The reason behind it can be the opposite direction of the order sheet. Sometimes printer also fails to recognize the index sheet correctly which can lead you to this error.

Remedy:

  • Close the document cover if it is open
  • Set the Index Sheet correctly
  • Check if the Index Sheet’s standard position is clean or not  
  • Reprint the index sheet if it is not clean
  • Clean the document glass.

C) Code:  15

Description:

It is a remaining maintenance media error. The test which will display in the printer is as follows:

“Remove the CD/DVD from the tray to carry out maintenance, then press the [CD tray] button.”

Causes:

When the CD or DVD tray is not clean, or there are some stains on PW sensor, then this error shows up. Sometimes faulty carriage unit can also be responsible for this issue.

Remedy:

  • Clean the PW sensor area properly
  • Connect the PW sensor connector cable to the connector of the PW sensor and CR Encoder board
  • Replace the PW Sensor connector cable if it is damaged
  • Replace the Carriage Unit if it has malfunctioned
  • Clean the marking of the CDR Tray
  • Install the CDR tray correctly

Epson SureColor Series

A) Code:  1101

Description:

It is a CR life error which generates when the CR scan pass counter has reached the specified lifetime limit. It indicates that the INK TUBES have reached the end of their service life.

Causes:

Counter issues of the ink tube or faulty ink tube can be the reason behind this error.

Remedy:

  • Replace the ink tubes if it is damaged
  • Reset the counter of the ink tube

B) Code:  1125

Description:

It is a CR HP detection error in which the CR HP SENSOR fails to detect the CR UNIT or the unit fails to recognize the sensor.

Causes:

It can happen due to CR HP SENSOR failure, false apprehension of the home due to a paper jam or any other obstacle and misreading of CR SCALE.

Remedy:

  • Replace the CR HP SENSOR if it has failed
  • Re-install the CR ENCODER and if it has malfunctioned then replace it
  • Clean the CR SCALE by applying ethanol
  • Replace the CR SCALE if it has collapsed
  • Replace the CR Lock if not working properly

C) Code:  1A39

Description:

It is a head error. In this, the electric parts get damaged due to improper head FFC connection

Causes:

It can come up due to connection failure of the Head FFC. It can also damage electrical parts or components if the connection is improper of Head FFC connection. Sometimes a damaged drive circuit in the printhead can also trigger this error.

Remedy:

  • Replace the Head FFC if it is malfunctioned
  • Replace the printhead
  • Replace the main board

Epson Stylus Pro Series

A) Code:  122A

Description:

It is an overload error

Causes:

The reason behind this error can be the overflow of the current to the PF MOTOR,  the cable of PF ENCODER is damaged, irregular load and PF ENCODER or PF MOTOR failure

Remedy:

  • Replace the PF ENCODER
  • Replace the MAIN BOARD

B) Code:  122B

Description:

This error is an over speed error

Causes:

When the PF MOTOR is driven at a speed faster than a predetermined one during deceleration, then this error occurs. It can also happen due to irregular load, PF ENCODER failure, damaged SUB-B BOARD and  PF MOTOR driver failure

Remedy:

  • Replace the PF ENCODER.
  • Replace the SUB-B BOARD
  • Replace the MAIN BOARD.

C) Code:  00010000

Description:

It is a PF encoder check error. When you encounter this error, then the printer stops operation as it fails to detect the encoder pulse signals at intervals of the specified time during the power-on initialization operation or while the PF Motor is driving.

Causes:

The reasons behind this error are as follows:

  • The PF Encoder connector is disconnected
  • The PF Motor connector is not connected, or the harness is broken
  • The wiring of the A and B phases are wrong
  • The wiring of the motor is faulty
  • The PF Motor has shorted out.
  • The PF Motor kept rotating abnormally.
  • The fuse for the motor driver has blown
  • The Main Board has damaged, and +42V/+24V remote control is broken
  • The Power Supply Board is damaged

Remedy:

  • Clean all the dirt or paper dust on the loop scale and check if it is damaged or not  
  • Reconnect the PF Encoder connector or the PF Motor connector
  • Adjust the PF Timing Belt Tension
  • Replace the PF Encoder sensor
  • Replace the PF MOTOR ASSY
  • Replace the BOARD ASSY

Epson printer repair near me

Epson B Series

A) Code:  09

Description:

It is a communication error which shows up like this in a printer

“Power: -.Error: -. Ink: -. LAN(Orange): -. LAN(Green): -.”

Causes:

When the printer fails to communicate with the system accurately, then this error comes up.

Remedy:

  • Correctly connect the panel FFC to CN1 on the Panel Board
  • Replace the panel FFC  if it is damaged
  • Replace the panel board if it has malfunctioned
  • Connect the power supply unit cable to CN4 on the main board
  • Replace the power supply unit if it has damaged

B) Code:  08

Description:

This error is a double feed error. In the printer it shows like this:

Power: -.Error: -. Ink: Light. LAN(Orange): -. LAN(Green): -.

Causes:

It happens when you feed multiple pages at once into the printer. Sometimes wrong size paper can also be the reason behind it.

Remedy:

  • Set the extension spring to retard between the retard roller unit and the ASF frame
  • Check whether the paper-back lever is operating correctly or not.
  • Adjust the extension spring 6.45 between the ASF frame and the paper-back lever

C) Code:  06

Description:

It is an incorrect ink cartridge error. Which displays in the printer like this:

“Power: -.Error: -. Ink: Light. LAN(Orange): -. LAN(Green): -.”

Causes:

When the ink cartridges are not detected, then this error occurs. Sometimes when ink is out in some ink cartridges then also you can encounter it.

Remedy:

  • Check whether the ink cartridge is installed correctly or not
  • Connect the memory chip if it is disconnected or not chipped
  • Connect the head FFC to the connector on the CSIC Board
  • Replace the CSIC board if it has damaged

With the help of remedies mentioned above, you can quickly get rid of all the problems related to Epson error codes. However, if you still face issues then contacting Epson technical support at will be a wise decision as now only an expert who has handled and given Epson printer problems and solutions will be able to help you. Today you can find many options by just typing “Epson printer repair near me” in your browser as several service providers are nowadays giving 24×7 support.

How to Configure EPSON Receipt Printer to Print Online Orders?

Epson is the most popular brand name and now it has been esteemed when it comes to receipt printers. EPSON Receipt Printer to Print Online Orders is a fully featured thermal printer which delivers fast receipt printing speed and is backed by the industry’s best-in-class reliability in high volume environments. They are easy very easy to set up, the hardware and printouts are good quality. It doesn’t take time to maintain and they last a long time.

EPSON Receipt Printer to Print Online Orders

Therefore, if you desire to be able to print Open Dining order notifications to your Epson receipt printer, though, you require utilizing Epson’s software, as the Windows automatic discovery and installation of your printer just won’t cut it. You need to download and install the Epson Advanced Printer Driver (APD), the steps are defined as below. Then just walk through the steps which given in this article in order to configure my Epson receipt printer to print online orders.

Steps to Configure EPSON Receipt Printer to Print Online Orders

  • First of all, check that the Epson printer is connected directly to your computer or over a local network, and is powered on.
  • Next, you will need to verify that the printer isn’t already installed on the Windows computer. To verify this thing, you will need to visit your Windows Control Panel in order to verify if the printer is listed on the “Devices and Printers” page. If it’s not, then its fine, but in case, if its then you must delete it.
  • Make sure that deleting an existing printer could affect a current print configuration with your restaurant’s POS system, for example.
  • Now you should properly follow the next steps to installing the Epson APD.

Installing the Epson APD:-

  • The first step for you is to download and install the Epson APD, you can do this thing by visiting the official website or visiting the internet.
  • Download “.zip format”, you will need to extract the files before you can effectively run them.
  • After extracting the files, double-click on the file named “APD_455dE.exe” to begin installation of the APD.
  • When the POP up appears, then click the Yes button to continue.
  • Then you will enter a “Welcome” window.
  • Hit the “Next” button.
  • In the “License Agreement” window, click the option to accept the terms, and then click “Next” button.
  • Next, you will be prompted to choose a setup type. Choose “Minimum (Recommended)” radio button option, which is selected by default, and click the “Next” button.
  • Then a “Printer Configuration window”, you will need to hit the “Add” button on the right side of the window, which will take you to the Add Printer window:
  • Hit on the “Select driver” dropdown and scroll to choose the “Epson TM-T88IV Receipt” item in the list and click on it. Same select “Printer name” dropdown to whatever name you want.
  • Select one proper “Port Type”, fro, options, Parallel port: Serial port, Ethernet port, or USB port.
  • In the “Set as Default Printer” drop-down the list, you only need to select option Epson receipt printer to be the main unit for ALL print jobs at your location.
  • Hit the “Next” button.
  • In the “Parallel Port Setting” page, you will need to Setting up a parallel port-LPT Port Section- you will need to hit on the drop-down list to choose the port, either it could be LPT1, LPT2, LPT3, and so forth. You may need to select each one and save the configuration change
  • After you have verified/selected your LPT port, then hit the “Next” button.
  • The above step will bring you back to the “Printer Configuration” window, which will now list your newly installed printer.
  • Click the “Next” button, which will bring up a “Start Copying Files” window.
  • Hit the “Next” button, which will begin the driver installation process.
  • Hit the “Finish” button
  • If your Epson printer is of the serial port variety, you will need to create a Serial port, and click “Next”. After then you will be presented with the Serial Port Settings window.
  • Select all the drop down one by one in the list and save the configuration change information until you find the one that successfully prints out a test page and once you have the proper configuration and then click “Next” button.
  • Now you will then go through the remaining setup windows, as above in the “Create a Parallel port” section. Follow the process like select “Printer Configuration” window then click “Next”, choose “Start Copying Files” window then click “Next”, choose “Setup Status” window and then wait for it. Then the final window, appear then click “Finish”, then you’re all done.
  • Then, create an Ethernet port, in the “Ethernet Settings window” setting, you’ll need to know the IP address of the Epson printer if you want to connect to. IP addresses for local network devices usually start with “192” or “10”.
  • Once you have the IP address entered, click “Next”. Follow the remaining setup windows in the Create port” sections, as above.
  • Create an Ethernet port.
  • When all thing completed, then you will be ready to rock ‘n roll.

Epson Technical Support Number 1-800-610-6962

If you face any issue to following the above steps, then call at Epson Technical Support Number, which is available 24×7 days to your help. We are reliable and versatile support service provider and giving excellent Epson support & services to the customers for their Epson difficulties. A team of our well-experienced and certified technicians can fix your all kinds of Epson issues.

How to Change Change Epson Printer Print Settings on Mac-book

The Epson printer allows you to print, copy, and scan documents using a wired or wireless connection. Whether you are using Window or Mac computer, you can easily connect the Epson printer as well as Change Print Settings on Epson efficiently according your requirement. Well, many users have encountered the technical difficulties while making the print quality settings on their Epson Printer. So, if you are one of those users who have the problem exactly the same, then don’t worry about it! Here, the blog will explain the simple steps on Change Print Settings on Mac Epson Then you just need to follow the below steps to quickly solve the problem.

Related Blog: How To Add A Printer To A MacBook Air by Epson Printer Support

 

Change Print Settings on Mac

Steps to Change Print Settings on Mac Epson?

You can follow these steps to change or adjust your printer settings.

Step 1:- Access the Page Setup dialog box.

First, you will need to access the printer driver for Mac OS X.

Step 2:- Choose Printer

Then you have to select the printer that you are using as the “Format” for setting.

Step 3:- Select the Paper Size Setting

Next, choose the appropriate Paper Size setting.

Note: Ensure selects XXX (Sheet Feeder – Borderless) if you wish to print borderless photos.

Step 4:- Pick Up Orientation Settings

Then choose the appropriate Orientation settings.

Step 5:- Orientation Settings

Then hit “OK” button to close the “Page Setup” dialog box.

Step 6:- Access the Print Dialog Box           

Now again access the Print dialog box for Mac OS X

Step 7:- Choose Printer & Make the Copies & Pages Settings

Select the printer that you are using as the Printer setting. Then make the “Copies & Pages” settings.

Step 8:- Pick Print Setting   

Then select Print Settings from the pop-up menu.

Step 9:- Choose Media Type, Color, and Mode settings

Now, you will need to choose the suitable “Media Type”, “Color”, and “Mode settings”. Then see online help for details of Print Settings.

  • You can select the “Correct Paper Type”.
  • You can use “Gloss Optimizer”.

Step 10:- Print one Test Copy

After completing the above steps, you must do to print one test copy and verify the results before printing an entire job.

Epson-printer-tech-support-11024x339

Epson Customer Support Phone Number Is Available 24×7 To Your Help:-

In case, you have any doubt or issue to follow the above step, then you can take appropriate and comprehensive guidance by connecting Epson Customer Support team. Dial Epson Customer Support Number, which is available 24×7 days to help, where you can obtain online support & step to fixing this issue by techies. The qauylified technicians will give you reliable support & 100% satisfactory solutions to fix the Epson Printer technical problems or issues in a short time.  Hence, call now to experts and get urgent help for further queries.

How to Restore an accidentally deleted printer back to computer

Epson printer are well known devices used by thousands of users worldwide. But sometimes these printers can suffer from severe technical faults such as restoring accidentally deleted printers issue which occurs due to freezing problems, data corruption technical problems, system crash problems and other corrupted issues of the restored printer are responsible for such faults. Users here are always advised to perform repair actions such as file scan, threat scan as well as registry optimization process with the help of suitable program files. Below we will introduce you steps to fix Restore an accidentally deleted printer back to computer .

 Restore an accidentally deleted printer back to computer

Steps to troubleshoot restore accidentally deleted printer back to computer issue

Step 1: System Restore

Users are advised to work with the system restore software to recover their device as well as its working configuration issue. It will help users to restore the system configuration back to its normal state to enable you work properly. Also it will help undo all deleted action performed by the user.

Step 2: Restoring system

It can easily be done by accessing the folder of OS ‘Start’ menu. You will come across various options to allow themselect from a number of created restore points and choose one which was created at the time when printer was installed.Now reboot the system to restore its working configuration back to normal mode. The deleted printer can easily be accessed from the ‘Control Panel’ where the system will restart after the restore operation has been performed.

Step 3: Reinstallation of the device

Work with the ‘Add Printer’ options in the ‘Control Panel’ to select the software from the available listed icons in the ‘Add printer’ menu. The next thing is to install the printer in the system. Restart the system if necessary to recover and work with the deleted printer with no further issues.

Related Blog: How To Fix Epson Printer Error Code W-12?

epson-printer-support-phone-number

Call our technicians at Epson Printer Support Number and fix your problems immediately Get connected to our technicians at Epson Printer Customer Support Number 1-800-610-6962 to resolve your complex to complex issues with our solutions. We are available 24*7 hours to assist you in fixing up Epson printer issues as and when needed. Call us now and experience our world class support solutions.

 

how to change Epson printer color settings on Epson printer? 1-800-610-6962

If you have purchased an Epson printer and configured with your computer, but now when you try to print your document, there is a problem occurring in print Black and White ink.  Is it correct? If yes, then don’t worry about it! Actually, something went wrong with your Epson printer. You might need to Modifying color settings on Epson printer, in the proper way, for correct printing.

Therefore, Epson Printers usually come with a diversity of color cartridges. And by default, your Epson color printer uses the black ink darker color. But if you need to print a document in a different color, then you can modify your printer preferences on your Windows or Mac OS X computer accordingly.  So, if you want to know the process that How to Print in Black and White on Epson Printers? Or want to how you can easily Modifying Epson Color Settings, then you just need to follow the below steps to instant fix it.

Steps To Modifying Epson Printer Color Settings:

For Windows:-

  • First of all, open the document that you wish on printing in black and white.

Epson printer setting

  • Then you have to tap on the “File” menu and then choose “Print” option.

Epson printer color setting

Now you have to check the Epson printer properties, which you wish to use is highlighted on-screen.

Epson printer color setting

  • It’s time to hit on either “Properties” or “Preferences”, according to your Epson printer models.

Epson printer color setting

  • Then you need to click on the “Advance” tab labeled.

Epson printer color settings

  • Next, you have to hit on “Black/Grayscale” in the “color” radio button, according to your choice.

Epson printer colors settings

  • Hit “OK button.

7

  • Now your document will now ready for print in black and white color ink.

8

For Mac OS X:-

First of all, open your document that you wish on printing in black and white.

Then hit on “File” and then choose “Print” option.

In the next step, you have to check your Epson printer & set properties that you want to use, that should be highlighted on-screen.

Now it’s time to hit on “Print Settings” and then printer options pop-up menu show on-screen.

Hit on “Grayscale” or “Black” in the “color” radio button, according to your choice.

Hit “OK” button.

Then it’s time to choose the option to print your document, and then you will be able to print in black and white ink color.

Epson Printer Support

Still, if you have any doubt to pursue the above steps, then do call us at our Epson customer care toll free number to receive prompt assistance.  Through this number, you can instant connect with our team of technical support and get instantly resolved all your queries. Hence, our technicians are available 24×7/365 days for your questions.

How to connect Epson printer to laptop? 1-800-610-6962

Epson printers are widely known printing devices among users worldwide. But as they are technical devices, unexpected issues are bound to happen. Well, users may often come across situations where they are faced with an issue related to How to connect Epson printer to laptop. connect Epson blog is all about getting a proper connection of Epson printer to laptop. Let’s see all the below given steps now.

connect Epson printer to laptop

Steps to connect Epson printer to laptop

Before moving ahead with the process of connecting Epson printer to laptop, make sure that your device is all set up with a wireless method or via an Ethernet connection as recommended

Step1: Initial stage

  • Get access to the “Start Here” sheet and go to “Epson printer main page” section

Step2: Download phase

  • Next, users are advised to download and then install the “Epson Connect Printer Setup Utility” feature to move ahead with the process to connect their Epson printer to laptop.

Step3: Terms and conditions

  • Next, users are required to agree to a “End-User License Agreement’ and then hit on the “Next” button.Click on “Install” button and then hit the “Finish” icon.
  • Selection of the type of product is to be selected and then tap on “Next” option.

Step4: Registration phase

  • Select the Printer Registration” icon and click on “Next” icon.
  • Tap on the “Agreeicon and then hit on “Next” option.

Step5: Registration phase

  1. When the “Register a printer to Epson Connect message, is visible, click on OK.
  2. Perform the following steps:
    1. While creating a new account, you are requested to fill out a “Create an Epson Connect Account “form and then hit “Finish” option.
    2. If anyone is registering for a new product with an existing account, then select “I already have an account” icon and fill up the “Add a new printer” form, then click
      “Add” icon next.
    3. Click the “Close” icon

For more such queries, do get in touch with us at Epson Printer Customer Support USA Epson printer support UK section and get your queries resolved instantly.

How to Update Epson Printer Firmware In Mac OS X?

On the off chance that any client is in require to Update Epson Printer Firmware In Mac OS X or Mac OS utilizing Download Navigator, at that point they can do this thing all the more helpfully itself. Epson printers, get a specific place in the commercial center, because of its superb execution, quality and usefulness. Well, if you want to avail the essential information for Epson Printer, then you get in touch with us our Epson technical support number.

How to Update Epson Printer Firmware In Mac OS X 1-1-800-610-6962

Update Epson Firmware in Mac OS X or Mac OS using Download Navigator

  • To begin with, ensure that your Epson Printer and your PC are associated legitimately to a similar remote system.Go to your hard drive, and open the “Applications” organizer, at that point pick the “Epson Software” envelope, and afterward hit on the “Epson Software Updater” just to download the utility. (Regardless you can’t see “Epson Software Updater” in the Epson Software organizer, so you can likewise go to the “Epson Software Updater” page to download and introduce the utility.

Update Epson Printer Firmware in Mac OS X

  • Next, hit on “Yes” button and then you will see a dialog box, so hit on the “Install” button.
  • Press on “Continue” button and then hit on “Continue” button again.
  • Next, hit on “Continue” then “Agree” button when the Software License Agreement window appears.
  • Press on “Install”, and then “Continue”.
  • When the installation was successfully done, and then press on “close” button. Ensure your printer is turned ON.
  • Now it’s time to open the “Applications folder” again, and choose the Epson Software folder, and then launch “Epson Software Updater”, that will allow to search for printer updates.
  • Next, choose “Epson Firmware Update” and then “Install”.
  • Follow the on-screen guidance for Epson Firmware Update. Ensure don’t turn the printer off during the process.

Epson printer customer support

Get the Prominent 24/7 Epson Printer Customer Support for Issues:-

If you have any further issue associated the Epson Printer & its driver updating, then you can connect with our Epson Printer Customer Support team for immediate help. Our skilled and experienced technician would be at your service 24×7 to give you the best solution & services.

Steps to Password Protect an Epson Printer?1-800-610-6962

Protection is an essential task for every device and it’s the same case with Epson printers to password protect it. This article will guide you about top steps to password protect an Epson printer by Epson Printer Support Number 1-800-610-6962 experts.

Steps to password protect an Epson printer

Setting up of a password

Installation of a commercial program will let users protect the printer with a password, so that no other print jobs will be able to complete without providing the right credentials. Printlock here will works with any kind of printer which is connected to a Windows PC by prompting for a password whenever a document is being sent to the printer.

  • Go to the browser and then download the software from the Print lock URL.
  • Installation of the software on the device which is connected to the printer a user is wishing to protect is necessary.
  • When prompted, input a password which will only be remembered by users.
  • The next time if a user is trying to print, they will immediately prompted by a password dialog box. The print job will not complete until the correct password is entered as suggested by Epson Printer Technical Support

Restricting user’s account

Windows does not comes with a built-in password feature, but if a user account has a password set to it, one can set it easily so that only their account can be accessed to the printer by locking out all other users who can’t access their username and password.

  • Log in as an administrator users and click on the Start, Printers & Faxes option
  • Find the printer which you want to protect, and right-click the Properties option. In Windows 7, users need to double-click on the printer icon and then select the Customize this printer option.
  • Hit the Security tab, and a security setting for the printer will be visble.
  • Highlight the type of account in the Group or User Names section, and make sure that all the boxes under Allow icon are properly checked.
  • Highlight the “Everyone in the Group or User Names” section, and make sure that all the boxes under the Deny are fully checked.

What users can expect at our Epson support section:

  • Error Troubleshooting with Printers
  • Online Assistance for Spooler Problem
  • Printer Tune-up and optimization
  • Paper Jam and Slow printing problem
  • Driver Repair and Re-installation Support
  • System Compatibility Issues with Printer
  • Printer Network and Connection Problems
  • Printer Setup and Configuration Issues
  • Driver Installation Support Service

Epson Customer Support specialist engaged in delivering the fastest ever printer support services in a well-known printer support organization. He had been chosen as the best article writer in the field of Epson topics. He holds deep technical expertise in resolving a wide number of printer issues as and when required by users.

 

How to enable Wi-Fi Direct mode in Epson printer?1-800-610-6962

Wi-Fi Direct Mode Setup in Epson printer easily fix up the product to communicate directly with the computer or another device without even requiring a wireless router or any kind of access point. As said by Epson printer Setup support technicians, while operating in this mode, the user’s product will easily display an AP connection symbol on the LCD screen in a clear view. This is an advanced process where one can easily choose to establish a direct communication between both the devices: the printer and the computer or with other devices, without the use of a wireless router or an access point. But as this is a technical term, enabling Wi-Fi in direct mode issues can occur anytime. So a proper care needs to be taken care of.

How to enable a Wi-Fi Direct mode in Epson printer 1-800-610-6962

Step to enable Wi-Fi direct mode in Epson printer

Step1: Home button

Tap on the Home button carefully and then press the ‘Wireless’ icon to proceed further.

Step2: Wi-Fi set up

Selection of “Wi-Fi” Setup is to be made and wait until you are directed to the next step,

Step to enable Wi-Fi direct mode in Epson printer

Then, from the list of options available in front of you, just choose the Wi-Fi Direct Setup icon.

Step3:  Connection set-up

  • Tap on the Connection Setup wizard button and then carefully choose the ‘Change Password’ option. Click on the Yes button to continue.
  • Enter the Wi-Fi Direct’s password which should at-least be of 8 characters and then tap on the “Enter” button.

Connection set-up with Epson Printer

Step4:  Scrolling button

  • Keep on scrolling down to easily view the SSID feature (Wi-Fi network name) and password.
  • With the help of your computer device or any other wireless device, selection of the SSID on the Wi-Fi network name is suggested by Epson printer technical support team members and next, just enter the password as guided by expert team.
  • Click on the “Home” button to get directed to the Home screen easily.

Epson printer configration

Here all your headaches related to Epson printer have been resolved. Our expert teams of Epson printer configure support professionals are all time ready to fix your problem at go. Call us Toll-Free 1-800-610-6962 for your Epson problems and we are right there at your doorstep

How To Reset The Epson K100 Adjustment Program?

The Epson K100 Adjustment Program is especially used to reset all the “Waste Ink Pad Counter” feature, and “EEPROM initial settings”. Epson K100 is a software which is developed to enable the printer print continuously without error. But as we know, technical issues may happen anytime while working the printers and so our Epson printer technical support professionals have described various advanced steps to reset the Epson K100 Adjustment program effectively.

Epson K100 Adjustment Program are

Other functions of Epson K100 Adjustment Program are:

  • Handling of the”Initial Ink Charge” features
  • “Head ID Setting” management process
  • Adjusting the “top margin Adjustment” mode,
  • Helps in managing the “Bi-D Adjustment” feature
  • Managing of the “USB ID Input” process.
  • The Epson K100 Adjustment Program also helps in the cleaning process of the “Print Head” as well.

Steps to reset the Epson printer K100 Adjustment Program

reset the Epson printer K100 Adjustment Program

Step1: Connecting the printer

  • Connecting the printer to the computer initially to turn it on is the very first step to be performed by users.

Step2: Extraction phase

  • Extracting of the “Adjustment program” for Epson K100 is needed as advised by Epson printer K100 Adjustment Program tech support

Step3: Adjprog file

  • Open it and then get access to the folder which is named as “Adjprog file”.
  • Next, simply click on the “Select” option

Step4: Clicking on the arrow

  • Click on the arrow and then select the “K100” option to proceed further

Step5: OK option

  • Next, just tap on the “OK” option

Step6: Particular adjustment mode

  • Next, you are simply required to tap on the “Particular adjustment mode” option

Step7: Waste ink pad counter

  • Selection of the “Waste ink pad counter” is necessary for users
  • Next, simply click on the “OK” option and tap on the “Check” icon

Step8: “Check” option

  • Tap on the “Check” option and then carefully tick the “Main pad counter” icon

Step9:  “Initialization” icon

  • At last, simply click on the “Initialization” icon and tap on the “finish” option to finish the process

A note of caution:

Adjustment program for Epson K100 software can be well utilized for other K series printer such as K101, K200, K201, K300, K301 and many more.

epson printer tech support

Come and explore our Epson printer customer support  Toll-free 1-800-610-6962 to help us assist you in resolving all your related Epson printer technical snags. We promise our customers to deliver them an utmost level satisfactory results as and when required